Features：

① Small size, light weight, easily attached and detached.
② Abundant lineups corresponding to wide-range pressure.

Features:

① High response typ with flash diaphragm.

② Compact size, Easy mounting or detaching

Features：

① Use upto a temperature (150 ℃)

② Compact size and light weight, easy to install/detach.

Features：

① High pressure measurement

② Pressure receiving part is the integration structure with thread.

Application:

High level oil pressure and hydraulic system, Hydro-forming machine, Diesel engine common rail oiltight device.

Features:

① Compact and light weight φ15 mm x 33 mm, Approx. 25 g

② Screw M10 x P1.0

③ Non-linearity 0.5 %R.O. / Hysteresis 0.5 %

④ Safe temperature range : -30 dc ~ 150 dc

⑤ Compact flash diaphragm type (Bolt shape)

⑥ High response, and no need to pulling out in the pressure inlet.

 Application:

① Industrial machine that measures pressures such as adhesive, paste, paints and greese.

② Experimental uses of adapting for car such as hydraulic brakes and air conditioner compressors.

③ Testing set to shich it gives priority to high response.

Features:

① Highly accurate pressure transmitter 0.2%R.O. as a standard by SOS technology. （including Non-linearity, Hysteresis and Repeatability.)

    0.1 %R.O. is also available as a high accurate type.

② High reliability and durability by SOS technology.

③ Can correspond to the absolute pressure and compound pressure

④ Small size and light weight

⑤ Wide range pressure from 200kPa to 50MPa can be measured.

Features:

① Excellent in the long term stability.

② Accuracy 0.1%R.O. is available (including non-linearity, hysteresis and repeatability)

③ Small size and light weight, the Cable horizontal putting out type is possible.

④ Excellent in solidity and a surge pressure

⑤ Attached zero point adjustment

Application:

Automatic transmission testing equipment, Solenoid valve testing device, Fuel cell evaluation device

Features:

① Excellent in the long term stability.

② Accuracy 0.1%R.O. is available (including non-linearity, hysteresis and repeatability)

③ Small size and light weight, the Cable horizontal putting out type is possible.

④ Excellent in solidity and a surge pressure

⑤ Attached zero point adjustment

Application:

Automatic transmission testing equipment, Solenoid valve testing device, Fuel cell evaluation device.

Features:

① Adopts the pressure sensor with high-performance sensing part (SOS element), and achieves the measurement error 0.1%F.S.

② Achieves the high accurate pressure measuring by 0.5%F.S. including all error in the temperature compensation range from -30℃ to 125℃.

③ High accurate model (-A01) achieves the error of 0.2%F.S. by improving the performance in the temperature compensation range from 0℃ to 50℃ based on the standard model.

④ The signal response performance is 2kHz.

Features:

① High accuracy at 0.2 %R.O.(including non-linearity, hysteresis and repeatability.)

    0.1 %R.O. as high accurate spec. is available.

② Natural frequency : 72 kHz~1 278 kHz

③ Gage pressure measurement (including compound pressure and negative pressure) from -100 kPa to each rated capacity (200 kPa ~ 10 MPa) is measurable.

④ Temperature environment upto150 ℃ is possible.

Application:

① Automatic transmission or engine test stand.

② Changeable valve lift mechanism testing instrument and various test benches, Solenoid valve experiment device, Calorie meter, CO2 compressor, Flow measurement device.

Features:

① Small size and light weight

② The manifold type pressure can be measured by high accuracy and the high response.

③ Natural frequency : 72 kHz~566 kHz

④ Accuracy 0.2 %R.O.

⑤ Temperature environment 150℃ at max.(NS30T-H series)

Application:

Experimental use of automatic transmission engine, Various test benches, Solenoid valve experiment device,Calorie meter, CO2 compressor, Flow measurement device.

Features:

① ASIC(Application Specific I.C.) amplifier is installed.

② High performance type pressure transmitter with a little temperature effect and excellent in noise.

③ Total accuracy : ±1.0 %F.S.

    (Including the temperature effect from -20℃ to 70℃.)

④ The newly developed high stability and low current strain gage has been used for the diaphragm made of 17-4 PHs.

Application:

Injection molding machine, Press machine, Various pump systems, Hydraulic apparatus.

Features:

① ASIC(Application Specific I.C.) amplifier is installed.

② High performance type pressure transmitter with a little temperature effect and excellent in noise.

③ Total accuracy : ±1.0 %F.S.

    (Including the temperature effect from -20℃ to 70℃.)

④ The newly developed high stability and low current strain gage has been used for the diaphragm made of 17-4 PHs.

Application:

Injection molding machine, Press machine, Various pump systems, Hydraulic apparatus.

Features:

• Double convex mechanism.

• All stainless steel hermetic sealed structure.

• Available for OIML R60 Class C3 certified model.

  
  

Features:

• Double convex mechanism. 

• All stainless steel hermetic sealed structure.

• Available for OIML R60 Class C3 certified model.

Features:

• Ideal for the measuring system of floor scale, tank scale and hopper.
  

• Available for OIML R60 Class C4 certified model.

Features:

• Ideal for the measuring system of floor scale, tank scale and hopper.

• Available for OIML R60 Class C4 certified model.

Features:

• Ideal for weighing system of floor / tank / hopper scale.

• Available for OIML R60 Class C3 certified model.

• C2B1B (General Spec.) 200 kg {1.961 kN} ~ 2 t {19.61 kN}

Features:

• Ideal for weighing system of floor / tank / hopper scale.

• Available for OIML R60 Class C3 certified model.

• C2B1B (General Spec.) 200 kg {1.961 kN} ~ 2 t {19.61 kN}

Features:

• Beam type load cell with all stainless structure.

• Rated capacity : CBE1-C3 (OIML standard) 5 kg ~ 200 kg

  
  

Features:

• Beam type load cell with all stainless structure.

• Rated capacity : CBE1-C3 (OIML standard) 5 kg ~ 200 kg

• CBE1 (General Spec.)

Features:

• Compact size, light weight load cell with all stainless steel construction.

Features:

• Compact size, light weight load cell with all stainless steel construction.

Features:

• Compact size, light weight load cell with all stainless steel construction.

Features:

• Precise low profile load cell with all stainless steel structure.

Features:

• Ideal for the weighing system of hopper & tank scales, etc.

Features:

• Suitable for high explosion risk envitonment such as with flammable liquid or gas.

Features:

• Applied to big rated capacity.

Features:

• Canister type load cell with safe overload capacity.

  
  

Features：

• Shear-web type structure and strong in lateral load.

Features:

• Suitable for the weighing systems of which mounting space is limited.

Features:

• Load cell for truck scale with stainless steel construction.

• Approved OIML R60 Class C6.

Features:

• The built-in amplifier with excellent noise-proof enables high precision measurement.

• Approved OIML R60 Class C6.

Features:

• Suitable for the weighing systems, such as hopper, tank, etc.

Features:

• Suitable for the weighing systems, such as hopper, tank, etc.

Features:

• Suitable for the weighing systems, such as hopper, tank, etc.

Features:

• Suitable for the weighing systems, such as hopper, tank, etc.

Features:

• Suitable for high-accurate measurement.

Features:

• All stainless structure.

• UMM1R : Robot cable is attached.

Features:

• High accuracy, tension / compression service load cell

Features:

• Suitable for tension force measurement such as crane wire rope.

Features:

• Compact size and light weight. Available for high speed measurement by bearing-free structure. (25 000 rpm: 100 Nm ~ 300 Nm, 22 000 rpm: 500 Nm, 1 kNm, 16 000 rpm: 2 kNm, 3 kNm, 14 000 rpm: 5 kNm, 12 000 rpm: 10 kNm)

• Measurement accuracy of ±0.02 %R.O. in frequency output and ±0.03 %R.O. in voltage output is achieved.

• Stator antenna has a split configuration to facilitate mounting and detachment.

• Special transmitter OPT-563B is provided.

  The operation without this transmitter is available and the stator outputs ±10 V.

• Calibraton software provided transfers commands between TMHSA and a PC, and allows users to read TMHSA setting parameter, proceed calibration, or write the number of moving average and the analog filter frequency.

• The detector for rotation speed and rotaional direction is prepared as an option.High accuracy and low noise are achieved by the digital singnal transmission by the optical transmission method of the patent.

  (USA PAT No. US6.472.656.B2, Japanese PAT No.3448738, PAT No.3453654)

Features：

• Compact size and light weight. Available for high speed measurement by bearing-free structure. (25 000 rpm: 100 Nm ~ 300 Nm, 22 000 rpm: 500 Nm, 1 kNm, 16 000 rpm: 2 kNm, 3 kNm, 14 000 rpm: 5 kNm, 12 000 rpm: 10 kNm)

• Measurement accuracy of ±0.02 %R.O. in frequency output and ±0.03 %R.O. in voltage output is achieved.

• The frequency response improves to 6kHz more than 1kHz of the TMHSA type.

• The torque signal outputs the frequency output and the voltage output at the same time.

• Calibraton software provided transfers commands between TMHSA and a PC, and allows users to read TMHSA setting parameter, proceed calibration, or write the number of moving average and the analog filter frequency.

• Even when a momentary error occurs, the error content can be confirmed because the error log is recorded

• CE mark is applicable.

• High accuracy and low noise are achieved by the digital singnal transmission by the optical transmission method of the patent.

  (USA PAT No. US6.472.656.B2, Japanese PAT No.3448738, PAT No.3453654)

• Special transmitter OPT-564 is available to connect.

Features:

• Optical transformer method thin flange type torque transducer

• Compact size and light weight. Available for high speed measurement by bearingless structure. (Corresponds to rotational speed of 25 000 rpm, and 22 000 rpm for 500 NM or more capacity)

• 0.05 %R.O. in analog output and 0.02 %R.O. in digital output for the accuracy of detected value is achieved.

• Easy to mounting and detaching by adopting with devided structure of stator (part of antenna).

• Special transmitter OPT-563B is provided.

• The detector for rotation speed and rotaional direction is prepared as an option.High accuracy and low noise are achieved by the digital singnal transmission by the optical transmission method of the patent.

  (USA PAT No. US6.472.656.B2, Japanese PAT No.3448738, PAT No.3453654)

Features:

• Optical transformer flange type torque transducer

• High revolution by bearingless structure.

• Easy to mount and remove by adopting the division structure of stator (a part of antenna).

• To transmit the digital signal by the optical transmission method of the patent, high accuracy (0.05 %) and the low noise have been achieved.

Features:

•  Optical transformer method flange type torque transducer

• High revolution by bearingless structure.
  

• Easy to mount and remove by adopting the division structure of stator (antenna).
  

• To transmit the digital signal by the optical transmission method of the patent, high accuracy (0.1%) and the low noise have been achieved.

Features:

• Optical transformer method non-contact type torque transducer.

• Making to low noise by digital signal transmission (ground brushless).

• Improve the stiffness and durability by the latest structural analysis technology.

• Easy to improving the performance and increase the capacity of the existed unit because of the same size.

• Improve the long term stability by applying the special gage.

• As equiping with the bearing mechanism, the installation of intermediate shaft receiving is unneccessary.

Features:

• TMNR type Torque meter is a highly effective rotary transformer to transmit the electric signal that the sensing point of torque detected.

Therefore, the steady performance is gotten as for the measurement for a long time, because driving side and the measurement side are noncontact.

It is used for the instrumentation control only for the measurement.

It is possible to use it for not only the torque measurement but also the instrumentation control field, For instance, control of stir power and kneading power in food chemical industry etc., because of the efficient rotary transformer adoption.

• The horsepower measurement on motors can be done, because the rotational speed can be measured by installing rotation detector (Options).

Features:

• TMNR-*ME type Torque meter can measure the torque from the geostationary axis to the high-speed spindle by the double bearing adoption. As the strength is higher than the standard model (TMNR type) both for radial and thrust, and a direct coupling with a propeller shaft etc. are more possible by making the bearing double. Because the dropping lubricant method is assumed to be a standard, the torque measurement to which a heavy load hangs is possible. (Please inquire for a grease lubrication method.)

• It is possible to use it for the test stand for not only the torque measurement but also the instrumentation control field , for instance, the car etc. because of the efficient rotary transformer adoption.

• Because the rotational speed can be measured by installing the rotation detector(option), the horsepower of the motor output etc. can be measured.

Features:

• Strain gage based non-contact type torque transducer with voltage output.

• Economical price. Compact and light weight design most suitable for mounting into the instrumentations.

• Non-contact signal propagation method by the electromagnetic induction, and a maintenance-free without a slip ring..

• Low inertia moment

• High accuracy ±0.12 %F.S. including non-linearity, hysteresis and repeatability.

• High revolution available (up to 8 000 rpm.)

• Built-in amplifier : voltage output : ±10 V

Features:

• Suitable for the detection of a minute torque.

• Small size and light weight

Features:

• Hygienic integrated mount(EHEDG compliant) with built-in high-accuracy load cell(PR6241 type)

• Hygienic design(EHEDG compliant)

• Highly corrosion-resistant top/bottom plates(AlSl316L

• FDA complianr silicone rubber sides

• Completely waterproof IP68/IP69K

• Cable outlet available in 2 direcyions(Horizontal:A、vertical:B)

• Base plate optionally available

Features:

• Hygienic all-in-one solution for reliable weighing of vessels

• Hygienic weighing module ensures efficient cleaning

• High degree of process reliability and precision thanks to the innovative side-force-resistant system

• Quick and easy commissioning due to smart add-on parts

• Durable, reliable weighing solution with excellent corrosion resistance

Features:

• Stainless steel housing:SUS630 equivalent　

• Completely waterpriif IP68　

• Ultra-high accuracy,C6:1/12500

Features:

• Stainless steel housing with completely sealed structure(IP68/IP69K)

• Accuracy class:C3 0.015%/C6 0.008%（25t,50t)

• Rated output:200,000 digits(25t:400,000)

• 2-wire RS485 communication allows connection of up to 8 units

• Connectable devices:PR5200/5230 Transmitter、PR5410 Process Indicator、PR5900 Maxxis5 Process Controller

Features:

• Stainless steel housing:1.4122　

• Completely waterpriif IP67

Features:

• Load cell with automatic alignment function

• Stainless steel housing:SUS304 equivalent

• Completely waterproof IP68

• Wide range of accuracy supported:D1(E)~C6(E)

Features:

• Stainless steel load cells for high capacity

• Stainless steel housing:SUS304 equivalent

• Completely waterproof IP68

Features:

• 2 strain gages are applied within the load cell for double output.

• For use at steel plants, etc., enabling 1 cable to continue output even if the other cable is damagrd.

Features:

• Compact,high-performance load cell.Individual accuracy:Achieves 1/12500! Ideal for production of high-accuracy tank scales and platform scales

• Stainless steel housing:SUS630 equivalent

• Completely waterproof IP68

• Ultra-high accuracy,C6:1/12500

Features:

• Gage is applied using sputtering technology to dramatically improve strength and accuracy.PR6211(rated 30~300kg)maximum allowable load>500kg.High temperature(LT:rated 500kg~5t)version is available for up tp 180℃

• Stainless steel housing:SUS630 equivalent

• Completely waterproof IP68

• Lateral load relief mechanism

Features:

• Gage is applied using sputtering technology to dramatically improve strength and accuracy. High temperature(LT:rated 500kg~5t)version is available for up tp 180℃

• Stainless steel housing:SUS630 equivalent

• Completely waterproof IP68

• Lateral load relief mechanism

Features:

• Stainless steel. 2 type of half bridge type and full bridge type.

• Rated capacity : 22.24 N{5 lb} ～ 177.9 N {40 lb}

Features:

• Aluminum alloy. Full bridge type.

• Rated capacity : 19.61 N {2 kgf}~196.1 N {20 kgf}

Features:

• Aluminum alloy. Roverbal type and full bridge type

• Rated capacity : 4.903 N {0.5 kgf}~147.1 N {15 kgf}

Features:

• Aluminum element, Roverval method sensor, full bridge type

• Rated capacity : 0.981 N{100 gf} ～ 2.942 N {300 gf}

Features:

• Aluminum roberval method sensor, full bridge type

• Rated capacity : 0.294 N {30 kgf} ～ 1.961 N {200 kgf}

Features:

• Stainless steel, and full bridge type

• Rated capacity : 1.961 N {0.2 kgf} ～ 39.22 N {4 kgf}

Features:

• Equipped with lift-off protection fitting

• All stainless steel construction (Selectable for alloy steel construction)

• Expansion capability in all directions.

• Japanese patent No.4422099

Features:

• Equipped with lift-off protection fitting

• All stainless steel construction (Available for alloy steel construction)

• Most suitable for the tank where the vibration such as pugmill is generated.

Features:

• For Tank or Hopper applications excellentwhen aggitation is a problem

Features:

• Space saving mounting attachment withslide stop mechanism.

• Excellent for severe side load conditionslike belt conveyors.

Features:

• Equipped lift-off protection fitting as a standard

• All stainless steel structure.

• There is allowable moving length in horizontal direction for the thermal expansion such as tanks.

Features:

• Most suitable to the application for thetank and hopper with the stir machine.

• Explosion-proof load cells can be installed.

特點：

• 標準配備防提離裝置

• 水箱等熱膨脹在水平方向上有允許的移動長度。

Features:

• Space saving, economically priced mountingattachment with slide stop mechanism.

• Non-restrictive arrangement.

Features:

• Space saving mounting attachment with slidestop mechanism.

• Non-restrictive arrangement.

Features:

• Equipped the check-rod for falling down prevention.

• All stainless steel structure.

• There is allowable moving length in horizontal direction for the thermal expansion such as tanks.

Features:

• Low capacity.

• Loading plate can be greater taken.

• OIML R60/C3 certified.

Features:

• Low capacity.

• Loading plate can be greater taken.

• OIML R60/C3 certified.

Features:

• Low capacity.

• Compact size.

Features:

• Mid. capacity.

• Suitable for thin weighing scale.

• OIML R60 C6 certified & NTEP approved.

Features:

• Mid. capacity.

• Suitable for thin weighing scale.

• NTEP approved.

Features:

• Mid. capacity.

• Accurate and reliable model (OIML R60 C4&C6 certified).