首頁 > 產品中心 > 產品線 > 半導體器件
集成電路 | 輸入/輸出積體電路
I/O 電路

 iC-GD Data sheet.pdf

iC-GD

通用輸入/輸出介面 - (新)

Features

  • Two channels, each configurable as input or output

  • Low-side and high-side switches with up to 500 mA per channel, current limitation, current measurement, status messages, cable break detection, freewheeling diode, reverse polarity protection, optional parallel connection of both channels

  • Output of ±10 V or 0/4...20 mA with 14-bit resolution

  • Measurement of ±10 V, ±1 V, ±100 mV, ±10 mV, ±20 mA or 4...20 mA with 16-bit resolution

  • Input for Pt 100, Pt 1000 temperature sensors

  • Multi-function 32-bit counter

  • Digital output with pulse-width modulation option

  • Internal temperature measurement with 1 K resolution

  • SPI interface

  • Calibration and configuration by external EEPROM via serial interface

  • Error message at overtemperature, overload and undervoltage

  • Shutdown of the outputs in case of error


Applications

  • SPS control system

  • Data acquisition

  • Sensor interfaces


 iC-GF Data sheet.pdf

iC-GF

IO-Link 收發器用於 IO-Link Slave

Features

  • IO-Link compliant slave transceiver

  • Dual channel current-limited switches, configurable for high-side, low-side and push-pull operation with tristate function

  • Configuration via pins or SPI interface

  • Protection against reverse polarity

  • Output current of up to 150 mA per channel

  • The channels can be inverted for antivalent output

  • Sensor communication request function (IO-Link wake-up)

  • Wide supply voltage range of 9 to 30 V

  • Sensor parametrisation via a feedback channel

  • Error detection with hysteresis and driver shutdown for excess temperature, overload and undervoltage

  • Switching converters and linear regulators for 3.3/5 V voltage generation


Applications

  • IO-Link slaves and IO-Link sensor interface

  • Digital sensors

  • Light barriers

  • Proximity switches



 iC-JRX Data sheet.pdf

iC-JRX

2x4 雙向24V高端驅動器, 帶單片機介面

Features

  • 2 × 4 bidirectional 24 V input/output stages

  • I/O mode programmable in 4-bit blocks

  • Guaranteed high-side driving capability of 100 mAdc and 500 mApeak for pulse load

  • Short-circuit-proof drivers with high dielectric strength

  • Low saturation voltage of 0.6 V/100 mA and 2.0 V/500 mA

  • Integrated flyback circuits

  • Programmable PWM function

  • Digital input filters with filtering times externally adjustable

  • Supply voltage and two-stage temperature monitoring


Applications

  • Dual quad high-side driver as a bidirectional μP interface with digital filtering for industrial 24 V applications



 iC-JX Data sheet.pdf

iC-JX

4x4 雙向24V高端驅動器, 帶單片機負載診斷介面

Features

  • 16 bidirectional input/output stages at 24 V

  • Input/output mode programmable in 4-channel blocks

  • Short-circuit-proof high-side drivers with diagnosis function

  • 500 mA pulse and 150 mA permanent load driving capability

  • Active flyback circuit

  • Load diagnosis for driver current, output voltage and impedance (cable fractures, resistance and short circuits)

  • 10-bit A/D converter for the generation of diagnosis measurement values

  • Safety features (voltage monitor, temperature sensor with warning and shutdown features, power output enable pin)

  • Variable digital filters for the debouncing of I/O signals

  • Fast 8-bit parallel or serial SPI-compatible μC interface permits use in buses

  • Logic supply from 3 V upwards


Applications

  • Industrial 24 V applications

  • Lamp switches with diagnostic features

  • Inductive load driver circuits for relays and valves


 iC-MD Data sheet.pdf

iC-MD

48位元正交信號計數器, RS422接收器和SPI/BiSS介面

Features

  • Counter resolutions: 16, 24, 32 and 48 bit

  • Counter resolutions: 16, 24, 32 and 48 bit

  • High count frequency of up to 40 MHz

  • Evaluation of distance-coded reference marks

  • Cascading/bus capable via SPI and BiSS C Interface

  • RS422, TTL, CMOS, LVDS input signals

  • Two actuator output signals

  • Operation from 3.3 V to 5 V

  • Operation modes: 1-channel ABZ inputs (TTL/RS422/LVDS), 2-channels ABZ inputs (TTL), 3-channels AB inputs (TTL)

  • Sub-system power switch offers reverse polarity protection for the overall system

  • Loss-of-signal indicator


Applications

  • PLC interface to linear scales and rotary encoders

  • Motion control

  • Quadrature encoder interfacing and processing


 iC-VRV Data sheet.pdf

iC-VRV

2x4 24V低端驅動器, 帶輸入/輸出功能和單片機介面

Features

  • 2 × 4 bidirectional 24 V input/output stages

  • I/O mode programmable in 4-bit blocks

  • Output current 100 mAdc and 500 mApeak for pulse load

  • Short-circuit protection

  • Saturation voltage of 0.4 V (1.5 V/500 mA)

  • Integrated freewheeling diodes

  • Output voltage of up to 48 V

  • Digital input filters with filtering times externally adjustable

  • Thermal shutdown, low voltage detection


Applications

  • Dual quad low-side driver as a bidirectional μP interface with digital filtering for industrial 24 V applications


接口 iCs . Biss

 iC-MD3 Data sheet.pdf

iC-MB3

BiSS介面Master主機, 1通道/3從機, SPI/並行控制器介面

Features

  • Bidirectional BiSS communication with up to 3 slaves

  • Supports BiSS C unidirectional, BiSS B, SSI and extended SSI

  • Synchronous acquisition with data rates up to 10 Mbit/s

  • BiSS B slave register operations

  • Automatic line delay compensation

  • Data lengths of up to 64 bit for sensor data per slave

  • CRC verification with up to 8 bits per slave

  • SPI or parallel interface to host e.g. microcontroller

  • Single 3 V to 5 V supply


Applications

  • BiSS B, BiSS C unidirectional, SSI sensor communication master

  • Device communication in multi-sensor sytems

  • Position acquisition with encoders

  • Drives and motor-feedback systems



 iC-MB4 Data sheet.pdf

iC-MB4

BiSS介面主機, 2通道/8從機, RS422收發器, 雙SPI介面

Features

  • Bidirectional BiSS communication with up to 8 slaves

  • Supports BiSS C, BiSS B, SSI and extended SSI

  • Synchronous acquisition with data rates up to 10 Mbit/s

  • Configurable interface with TTL, CMOS, RS422 or LVDS

  • Slave register operations during cyclic data transfers

  • Automatic line delay compensation

  • Data lengths of up to 64 bit for sensor data per slave

  • CRC verification with up to 16 bits per slave

  • 64 bytes memory for bidirectional register access

  • SPI or parallel interface to host e.g. microcontroller

  • Single 3 V to 5 V supply


Applications

  • Device communication in multi-sensor sytems

  • Position acquisition with encoders

  • Drives and motor-feedback systems


 MCB_datasheet_B1en.pdf

iC-MCB

FEATURES

SPI-to-BiSS 从机桥,带RS-422收发器

  • BiSS Interface slave

  • Full BiSS protocol support

  • Two data channel configurable

  • Three slave IDs occupiable

  • Single-cycle data buffer of 64 byte organized in multiple banks for simultaneous access

  • Built-in control communication

  • RS422 line driver/receiver for BiSS/SSI point-to-point network

  • BiSS bus structure capable

  • SPI slave interface for sensor data provided by microcontroller

  • Fast Sensor interface for direct sensor data provided by an SPI slave device

  • BiSS safety related features: Two data channels for Control and Safety Position Word, 6/16 bit CRC + CRC start value

  • BiSS timeout: adaptive, 2 μs, 20 μs

  • SSI protocol support

  • Operation from 3.0 V to 5.5V

  • Operating temperature range of -40°C to +125°C

  • Space-saving 16-pin QFN package


APPLICATIONS

  • BiSS slave implementation

  • Multiple sensor devices

  • Encoder

  • Condition monitoring extension

  • Diagnosis extension

  • Torque sensor

  • Acceleration sensor

  • Inclinometer

  • Safety light curtain



 MCW_datasheet_A1en.pdf

iC-MCW

特点:

RS422 BiSS 看门狗,带SPI

  • Acquisition of BiSS Single Cycle Data

  • Acquisition of BiSS Control Data

  • Monitoring of BiSS communication status

  • Error diagnostics for debugging

  • Pin for simple error indication

  • Auto compensation of line delay and conversion times

  • Internal 14-bit BiSS frame counter

  • Built-In RS422 receiver for direct BiSS interfacing

  • Support of BiSS data transfer rates of up to 10 MBit/s

  • Serial controller communication via SPI™ slave interface

  • Support of interrupt-output

  • Built-In system and high speed sample clock generation

  • 3.3 to 5 V supply (+/-10%)

  • Operational temperature -40 to +125 °C

 

应用:

  • BiSS communication monitoring

  • BiSS Safety extension of BiSS standard drives



 BL_factsheet_rev2.pdf

iC-BL

特點:

  • BiSS 線從機或主機

  • 2 線和 4 線 BiSS 線路接口支持

  • 完整的 BiSS 線路協議支持,包括前向糾錯 (FEC)

  • 低抖動的同步位置數據測量

  • 用於 BiSS Line 點對點和總線結構的片上 RS485 線路收發器

  • BiSS Line 到 BiSS C 協議傳輸

  • 帶 CMOS 驅動器/接收器的數字 I/O 端口

  • 傳感器端的 BiSS C 主接口,用於以菊花鏈方式連接多達 8 個數據長度高達 64 位的 BiSS C 從屬設備

  • 與 BiSS C 和 BiSS Safety 完全兼容

  • SSI 主接口

  • SPI 從機和 SPI 主機接口

  • I2C 主接口

  • 傳感器電源電壓:2.5 V、3.3 V 或 5 V(最大 200 mA)

  • 在 5 V 或 7 V 至 30 V 電源下運行

  • 工作溫度範圍為 –40°C 至 +105°C


應用:

  • 單電纜技術 BiSS Line master 或 slave implementations

  • 2 線和 4 線傳感器接口

  • 電機反饋

  • 位置感測

  • 機器人學

  • 長距離 SPI 鏈接

  • 強大的多傳感器數據通信

  • BiSS C 轉 BiSS 線適配器

  • 設備診斷和狀態監測